Wii Hardware \ Wiikey help

My only advise to you is to not type your name as the title of the thread.

Seriously now, if you don't know what you are doing - take it to a professional. Have you ever soldered before? If not - that would be your problem. Open it up and check no points are running together.

08/10/2007 Victoria

Kudos: 1,515

Mates: 133

brawlking says:

SEALED? youre sure youre putting it in the right way? the coded side faces the left when you put it in a vertically standing wii

08/10/2007 queens, U.S.A.

Kudos: 2,328

Mates: 86

ZOIDBERG says:

hahahah topic is funny, I was thinking this may be about Friday The 13th - Jason hahah Whoop!, but it was something about stuffing up a Wii

08/10/2007 Planet Earth, New New York

Kudos: 3,142

Mates: 50

hainaku says:

seriously, why use your name on the topic?

anyway, if you're not putting the disc the right way up as brawlking suggested, then you have botched the soldering. you probably bridged some connection or forgot to reconnect the ribbon cable for the DVD drive.

08/10/2007 Freedom is not free, many have paid for it with their lives...

Kudos: 2,706

Mates: 90

jac33au says:

forums.afterdawn.com/

Go here, its full of noobs who have messed up an install. there are a few pretty good people who will help there.

08/10/2007 Hervey Bay, Queensland

Have a close look at the way you put the face plate back on. I think you may have somehow put it around the wrong way.

Have you tried searching for that problem on google? I'm pretty sure I've stumbled onto this problem before in one of the other forums.

08/10/2007 Gold Coast, Queensland, Australia, Earth

Kudos: 3,142

Mates: 50

hainaku says:

i thought JackAz gave good advice. Take it to a professional if you don't know what you're doing. Open it up and check the soldering job again. Check that all wires and plugs have been reconnected - the ribbon cable and the power cable under the drive is important.

08/10/2007 Freedom is not free, many have paid for it with their lives...

hainaku said: i thought JackAz gave good advice. Take it to a professional if you don't know what you're doing. Open it up and check the soldering job again. Check that all wires and plugs have been reconnected - the ribbon cable and the power cable under the drive is important.

True point.

He's already come this far, he might as well try to solve the problem.

I just had a thought about that problem. If you've checked your face plate, then re-check your soldering again. I vaguely remember something about not soldering something properly. Oh, hang on, maybe you need to double check that you plugged the ribbon cable back into the DVD drive after putting it back into the Wii.

You should've tested first before reassembling it. That's what I did, for a few days, only because I felt too lazy to put it back together.

Everybody watch out for this guy, his name is Jason Voorhees

08/10/2007 Gold Coast, Queensland, Australia, Earth

psx-scene.com/

Experiencing a similar problem.
Check the ribbon cable and your solder points.

08/10/2007 Victoria

Well done Jackaz. Both for the advice and getting this back on track.

08/10/2007 Mill Park, Victoria

Thx d00d.

Jason needs to come back and tell us what's going on.

08/10/2007 Victoria

I don't think he's online.

08/10/2007 Victoria

Jeez and I copped flack for starting a thread to voice my opinions about Mono yesterday.....clearly my comments must seem a bit more substantial now?????

08/10/2007 Mill Park, Victoria

Nice to see people are on my side for once.

08/10/2007 Victoria

JackAz said: Nice to see people are on my side for once.

Believe me, more people than you realise are on your side.

08/10/2007 Gold Coast, Queensland, Australia, Earth

He gets the opposite to a 'bringing the lulz' certificate.

08/10/2007 Victoria

"Taking the Lulz"????

I think we need a medal!!!

08/10/2007 Mill Park, Victoria

Kudos: 5,604

Mates: 70

desi says:

Sorry for the kudos loss. Monolocco is banned again, now that we have catalogued this kind of thing across several threads so that the ban won't be lifted for benefit of the doubt.

Back on topic.

08/10/2007 I'm in your profile, deleting your spams for Great Justice.

Kudos: 3,142

Mates: 50

hainaku says:

what we need is for jason to come back! i hope we didn't scare the kid away.

08/10/2007 Freedom is not free, many have paid for it with their lives...

desi said: Sorry for the kudos loss. Monolocco is banned again, now that we have catalogued this kind of thing across several threads so that the ban won't be lifted for benefit of the doubt.

Back on topic.

Just one last one before we go back on topic.......

Thankyou Desi....... You have redeemed yourself! haha

08/10/2007 Mill Park, Victoria

Thx d00d.
I think we have given all the advice possible without him coming back and giving us an idea.

08/10/2007 Victoria

Jason: Are you out there? We need an update man.

08/10/2007 Gold Coast, Queensland, Australia, Earth

Kudos: 5,604

Mates: 70

desi says:

Does anyone know how exactly the CD drive knows when to draw a disc in, anyway? I've been Googling for schematics for self-loading disc drives to figure out how it does it (Wii has one, iMac has one, most car stereos have one) but haven't gotten a thing.

08/10/2007 I'm in your profile, deleting your spams for Great Justice.